Ürün ayrıntıları

Created with Pixso. Evde Created with Pixso. Ürünler Created with Pixso.
Tuzdan Arındırma Su Yapıcı
Created with Pixso.

20 m³/24h RO Seawater Desalination System with 99.5% Desalination Rate for Marine Use Operating at 5-50°C

20 m³/24h RO Seawater Desalination System with 99.5% Desalination Rate for Marine Use Operating at 5-50°C

Marka Adı: Jingchuang
Model Numarası: JC-CC30T/D
Adedi: 1
Fiyat: Negotiations
Ödeme Koşulları: L/C,D/A,D/P,T/T,Western Union
Tedarik Yeteneği: 100
Detay Bilgisi
Menşe yeri:
ÇİN
Sertifika:
CE
modeli:
WD-231
Çalışma basıncı:
55 bar
Tuzdan arındırma oranı:
% 99.5
su verimi:
15000L/gün
Çalışma Basıncı:
5Mpa
Ambalaj Net Ağırlığı:
620kg
Pompa Tipi:
Yüksek basınç pompası
Ürün adı:
Tuzdan Arındırma Su Yapıcı
Tuzdan Arındırma Verimliliği:
>% 99.5
Tuz atma oranı:
% 99.5
Kontrol Paneli:
Şalt
Çalışma Sıcaklığı:
5 ila 50 santigrat
Önceden fosiltrasyon:
5 mikron tortu filtresi
Ağırlık:
500 kg
Gerilim:
220-440v
Ambalaj bilgileri:
ahşap kutu
Vurgulamak:

RO seawater desalination system with factory

,

desalination watermaker with warranty

,

seawater RO system factory direct

Ürün Açıklaması
RO Seawater Desalination Reclaimed Water System

This equipment is a 20 metric tons per day integrated marine reverse osmosis (RO) seawater desalination system, specifically designed for various types of ocean-going vessels, engineering vessels, fishing boats, and offshore platforms.

Key Performance Parameters
Parameter Specification
Rated Water Production 20 m³/24h (at ambient temperature of 25°C and standard seawater salinity conditions)
Instantaneous Water Production 0.85 m³/h
System Desalination Rate ≥99.2% (after more than three years of stable operation)
Feed Water Quality Natural seawater, feed water salinity ≤40,000 mg/L
Product Water Quality TDS ≤ 500 mg/L, compliant with the "GB 5749-2022 Hygiene Standards for Domestic Drinking Water," suitable for direct drinking, personal hygiene, and equipment makeup water
System Recovery Rate 35%-40% (optimal recovery rate for marine desalination, preventing membrane scaling and fouling)
Operating Pressure System high-pressure operating pressure 5.5-6.5 MPa
Operating Temperature Feedwater temperature 0°C-32°C; ambient operating temperature 0°C-45°C
Operating Humidity 20%-90% (non-condensing, salt-fog environment)
Electrical Operating Parameters
  • Power Supply: Three-phase AC 380 V/50 Hz; customizable for marine AC 440 V/60 Hz
  • Total Installed Power: 7.5 kW
  • Operating Power: 6.8 kW (standard full-load operation)
  • Protection Rating: IP54 for the entire unit, suitable for humid and salt-fog environments on ship decks and in engine rooms
  • Control Method: Fully automatic PLC intelligent control, featuring one-button start/stop, automatic flushing, low-pressure protection, high-pressure overload protection, water shortage shutdown, and fault alarms
System Process Flow

Seawater intake → Coarse filtration to trap impurities → Raw water booster pump

RO Seawater Desalination System Process Flow Diagram