detalhes dos produtos

Para casa produtos

20 m³/24h RO Seawater Desalination System with 99.5% Desalination Rate for Marine Use Operating at 5-50°C

Nome da Marca:	Jingchuang
Número do modelo:	JC-CC30T/D
Quantidade mínima:	1
Preço:	Negotiations
Condições de pagamento:	L/C,D/A,D/P,T/T,Western Union
Capacidade de fornecimento:	100

Informações pormenorizadas

Descrição do produto

Informações pormenorizadas

Lugar de origem:

CHINA

Certificação:

modelo:

WD-231

Pressão operacional:

55 barras

Taxa de dessalinização:

99,5%

Rendimento da água:

15000L/D

Pressão Operacional:

5Mpa

Peso Líquido da Embalagem:

620 kg

Tipo de bomba:

Bomba de alta pressão

Nome do produto:

Desalinização Aquicultor

Eficiência da dessalinização:

> 99,5%

Taxa de rejeição de sal:

99,5%

Painel de controle:

Dispositivos de ligação

Temperatura operacional:

De 5 a 50 graus Celsius

Prefiltração:

filtro do sedimento de 5 mícrons

Peso:

500kg

Tensão:

220-440v

Detalhes da embalagem:

caixa de madeira

Destacar:

RO seawater desalination system with factory

desalination watermaker with warranty

seawater RO system factory direct

Descrição do produto

RO Seawater Desalination Reclaimed Water System

This equipment is a 20 metric tons per day integrated marine reverse osmosis (RO) seawater desalination system, specifically designed for various types of ocean-going vessels, engineering vessels, fishing boats, and offshore platforms.

Key Performance Parameters

Parameter	Specification
Rated Water Production	20 m³/24h (at ambient temperature of 25°C and standard seawater salinity conditions)
Instantaneous Water Production	0.85 m³/h
System Desalination Rate	≥99.2% (after more than three years of stable operation)
Feed Water Quality	Natural seawater, feed water salinity ≤40,000 mg/L
Product Water Quality	TDS ≤ 500 mg/L, compliant with the "GB 5749-2022 Hygiene Standards for Domestic Drinking Water," suitable for direct drinking, personal hygiene, and equipment makeup water
System Recovery Rate	35%-40% (optimal recovery rate for marine desalination, preventing membrane scaling and fouling)
Operating Pressure	System high-pressure operating pressure 5.5-6.5 MPa
Operating Temperature	Feedwater temperature 0°C-32°C; ambient operating temperature 0°C-45°C
Operating Humidity	20%-90% (non-condensing, salt-fog environment)

Electrical Operating Parameters

Power Supply: Three-phase AC 380 V/50 Hz; customizable for marine AC 440 V/60 Hz
Total Installed Power: 7.5 kW
Operating Power: 6.8 kW (standard full-load operation)
Protection Rating: IP54 for the entire unit, suitable for humid and salt-fog environments on ship decks and in engine rooms
Control Method: Fully automatic PLC intelligent control, featuring one-button start/stop, automatic flushing, low-pressure protection, high-pressure overload protection, water shortage shutdown, and fault alarms

System Process Flow

Seawater intake → Coarse filtration to trap impurities → Raw water booster pump

Etiquetas: