商品の詳細

Created with Pixso. 家へ Created with Pixso. 製品 Created with Pixso.
淡水 水 作り
Created with Pixso.

20 m³/24h RO Seawater Desalination System with 99.5% Desalination Rate for Marine Use Operating at 5-50°C

20 m³/24h RO Seawater Desalination System with 99.5% Desalination Rate for Marine Use Operating at 5-50°C

ブランド名: Jingchuang
モデル番号: JC-CC30T/D
MOQ: 1
価格: Negotiations
支払い条件: L/C、D/A、D/P、T/T、ウェスタンユニオン
供給能力: 100
詳細情報
起源の場所:
中国
証明:
CE
モデル:
WD-231
使用圧力:
55バール
脱塩率:
99.5%
水の出力:
15000L/日
使用圧力:
5Mpa
梱包正味重量:
620kg
ポンプの種類:
高圧ポンプ
製品名:
淡水 水 作り
脱塩効率:
> 99.5%
塩分除去率:
99.5%
コントロールパネル:
スイッチ
動作温度:
摂氏5〜50度
前濾過:
5ミクロンの沈殿物フィルター
重さ:
500kg
電圧:
220-440v
パッケージの詳細:
木箱
ハイライト:

RO seawater desalination system with factory

,

desalination watermaker with warranty

,

seawater RO system factory direct

商品の説明
RO Seawater Desalination Reclaimed Water System

This equipment is a 20 metric tons per day integrated marine reverse osmosis (RO) seawater desalination system, specifically designed for various types of ocean-going vessels, engineering vessels, fishing boats, and offshore platforms.

Key Performance Parameters
Parameter Specification
Rated Water Production 20 m³/24h (at ambient temperature of 25°C and standard seawater salinity conditions)
Instantaneous Water Production 0.85 m³/h
System Desalination Rate ≥99.2% (after more than three years of stable operation)
Feed Water Quality Natural seawater, feed water salinity ≤40,000 mg/L
Product Water Quality TDS ≤ 500 mg/L, compliant with the "GB 5749-2022 Hygiene Standards for Domestic Drinking Water," suitable for direct drinking, personal hygiene, and equipment makeup water
System Recovery Rate 35%-40% (optimal recovery rate for marine desalination, preventing membrane scaling and fouling)
Operating Pressure System high-pressure operating pressure 5.5-6.5 MPa
Operating Temperature Feedwater temperature 0°C-32°C; ambient operating temperature 0°C-45°C
Operating Humidity 20%-90% (non-condensing, salt-fog environment)
Electrical Operating Parameters
  • Power Supply: Three-phase AC 380 V/50 Hz; customizable for marine AC 440 V/60 Hz
  • Total Installed Power: 7.5 kW
  • Operating Power: 6.8 kW (standard full-load operation)
  • Protection Rating: IP54 for the entire unit, suitable for humid and salt-fog environments on ship decks and in engine rooms
  • Control Method: Fully automatic PLC intelligent control, featuring one-button start/stop, automatic flushing, low-pressure protection, high-pressure overload protection, water shortage shutdown, and fault alarms
System Process Flow

Seawater intake → Coarse filtration to trap impurities → Raw water booster pump

RO Seawater Desalination System Process Flow Diagram